Description
> |
|
The
CB Color Booster system consists of 19 user friendly color concentrates
developed to strengthen and enhance colors, print safer, and create consistent
matches in all Rutland Base ink systems. By mixing color booster into
similar M2 and MH colors (40% by weight maximum) you can strengthen and
adjust color shades without fear of affecting fusion. The Color Booster
mixing system will also create more than 2000 popular colors in a variety
of product series. Simply follow the formulations provided in Rutland’s
CB Guide Book or M2000 and WinMam software programs and use the appropriate
base to create HS, MA, MH, ML, MS, ND, NG, NM, NP, and NX series inks.
|
Applications
> |
|
See
application specification of the selected Rutland ink series. See the
corresponding technical data sheet listed in the Rutland Technical Data
brochure. |
MSDS
> |
|
When
mixing Color Boosters with other bases, use the MSDS # listed for the
base below. See MSDS File Repository.
|
Special
Notes > |
|
Some polyester
(P) and cotton/polyester (CP) substrates are difficult to block dye migration
and should be tested prior to production to ensure proper bleed resistance. |
Substrate
Materials > |
|
100%
Cotton
C |
50/50
Cotton/Polyester
CP |
Nylon
Mesh
NM |
Low
Bleed
Underlay
LBU |
100%
Polyester
P |
Lycra/
Spandex
LS |
| Recommended
Bases > |
|
Ink
Series |
Product
Number |
Description
|
MSDS
# |
Max
CB to Base Ratio |
Effect |
Ink
Series
Page # |
Substrates |
| MH |
MH-0538 |
Opaque Base |
1 |
50:50 |
High Opacity |
11 |
C, LBU |
| ML |
ML-0749 |
LB Jersey Clear |
4 |
50:50 |
Low Bleed |
12 |
C, CP, P |
| MS |
MS-0000 |
Primer Clear |
1 |
50:50 |
All Purpose |
9 |
C |
| NG |
NG-0026 |
Therm-O-Line |
1 |
30:70 |
Goop |
14 |
C, NM, LBU |
| NM |
NM-0053 |
Nylon Mesh Clear |
1 |
50:50 |
Nylon Mesh |
7 |
C, NM, LBU |
| NX |
NX-0031 |
Spand-E-Sol |
5 |
30:70 |
Spand-E-Sol |
8 |
C, NM, LS |
|
Color Boosters 
