Newman Roller Master Model L2 Screen Building Table
Achieve
Higher Screen Tensions Faster:
Using
the Newman Roller Master screen building table, you can tension any size, and most brands of Roller Frame in just a few seconds. The low friction, 4-way simultaneous tensioning on the Newman Roller Master , combined with a 3 minute holding stress, is equivalent to approx. 7 to 10 retensionings. Retensioning mesh with the Newman Roller Master after the 1st print run and reclaiming combined with a 1 minute holding stress is equivalent to approx. 3 - 4 retensionings.
Newman Roller Master Model L2 Will Accomodate:
Newman & STF All Roller Frames
23" X 31" OD MZX or STF 1.4 - 1.6
23" X 31" OD M3 or STF 1.4 - 1.6
25" X 33"
OD MZX, M3, or STF 1.4 - 1.6
Virtually ANYONE can stretch & retension screens.
Stretches a flat screen every time
Rapid mesh stabilization
Produces 3 times as many screens per hour (or more)
More uniform screen tension
Less physical effort
Less skill needed & simple learning curve
Rapid mesh retensioning
All
Newman Roller Masters operate with compressed air.
No electrical hook-up is required
You may also be interested in these related products:
Shur-Loc Mesh Panels For 18x20 W/ Square Bar
Stretch Devices Newman ST-1E Newton Tension Meter $465.00
$441.75 You Save: 5.00%
Stretch Devices MZX Newman Roller Frame All Roller
Frames 
Newman Roller Master Model L2 Screen Building Table
