Product Details

STF Roller Frames are available in textile-standard sizes, each frame is packaged in a box with all the necessary hardware. The hardware consists of locking strips, bolts, washers and corners. Unlike other roller frames on the market, the corners of the STF Roller Frame are pre-assembled on the long rollers, and the short rollers have the bolts and washers installed. All bolts are pre-lubricated with anti-seize to minimize assembly time of the STF Roller Frame. In addition, locking-strips are pre-cut and inserted in each roller/square bar.

STF Frames Feature:

• Encapsulated end caps do not allow water to enter the cavity of the frame through the bolt.

• Robust cast corners and end caps are the same material and quality that is used in high end pneumatic tools.

• Roller wall thickness of 0.080" helps resist frame deflection under tension.

• Stainless steel bolts & washers resist corrosion to give years of service.

• Available in 3 round and one square bar tubes for manual machines or 4 round tubes for automatic machines.

• Large Diameter Tubes 1.6" (M3 size).
  

Why roller Frames

TENSION LOSS. Tension after printing is easily controlled. Quickly (30-60 secs.) rotate only one roller to retension and restore your mesh to it's original tension (Newtons) level; increasing your fabric life and gaining control of printing variables.
 

NO NEED TO STORE FRAMES. Reduce your frames on hand, increase valuable shop space, and library only your film and digital file.
 

INVEST YOUR MONEY. Like other capital equipment in your shop, Roller Frames are a long-term investment engineered to last! In most cases, Roller Frames can be combined with lease purchases.