Rutland Foil Adhesive is a press-ready plastisol for direct screen printing onto fabric substrates that will have heat transfer foils applied. Designed to assure the best possible foil performance and maximum adhesion to the foil material. This product can be colored with Rutland Color Boosters.
X-Glue foil adhesive requires stirring before printing. Print X-Glue adhesive directly onto substrate or over an underbase. Clear adhesive is normally printed through mesh counts from 86-100 mc./in (34 mc./cm) using a soft squeegee 60-70 durometer.
Recommended Printing Techniques:
Flood ink into mesh opening with a medium durometer squeegee. (replace flood-bar)
Only the image area should be filled with ink.
Transfer to substrate surface using a light squeegee pass. Try to avoid multiple strokes.